One finish across several product families
RAL 7006 connects sliding doors, fixed units and concealed sashes. For your project, a consistent colour can accompany different opening actions and proportions.
Sliding doors, fixed glazing and concealed-sash windows: a Valbonne technical file.
This Valbonne file in RAL 7006 combines several aluminium product families: EYLINA 70C sliding doors, fixed glazing and EYLINA 70F.OC concealed-sash windows. Dimensions and hardware are detailed opening by opening.
This June 2026 technical file specifies dimensions and hardware for each item in preparation for manufacturing. It complements a different Valbonne project, presented separately in the project gallery.
What this file helps to prepare.
Combine large sliding doors and concealed-sash windows in RAL 7006 while distinguishing the dimensions and hardware specific to each opening.
Similar heights surveyed separately
Sashes measuring 1 845, 1 850 and 1 855 mm retain separate item references. Individual surveys prepare profiles, glazing and connections for the correct location.
Accessories specified for each composition
Internal reinforcements and stainless-steel tracks appear on certain items. They are selected according to the dimensions and loads of the glazed opening concerned.
Documented dimensions and configurations.
Dimensions in millimetres, width × height. Characteristics specific to the project file presented.
- Finish
- RAL 7006
- Sliding door studied
- 3 595 × 2 540 mm
- Alternative sliding door studied
- 4 790 × 2 575 mm
- Fixed glazed unit
- 2 365 × 990 mm
- Three concealed tilt-and-turn sashes
- 755 × 1 850; 755 × 1 855; 775 × 1 845 mm
- Additional concealed tilt-and-turn sash
- 765 × 1 700 mm
- Systems specified
- PAAL EYLINA 70C and EYLINA 70F.OC
Read the file preparation details
A survey for each opening.
The tilt-and-turn sash heights are similar but not identical. The file distinguishes them so profiles and glazing can be prepared for the correct opening. The same precision applies to sliding doors and fixed units.
Hardware assigned by item.
The document specifies internal reinforcements and added stainless-steel tracks on certain sliding doors, together with handles and locks specific to each configuration. These features do not automatically apply to the entire file.
Connect the file to local manufacturing.
Plans and item references then guide cutting, preparation and assembly. Our Valbonne workshop presentation shows the FOM double-head saw, punching machines and benches used in aluminium manufacturing.
Connect the project specification with manufacturing operations.
For a comparable Valbonne project, the file specifies cutting lengths, profiles and hardware for each opening. The FOM double-head saw, punching machines and workbenches perform complementary stages. The client therefore has a technical discussion that connects the design of the openings with preparation for installation.
See manufacturing operations →Let's prepare your technical file.
Indicate the city, openings and plans available to initiate the study.
Transmit my project →